UVI-II (Dual-Wavelength)

The two-channel inline UV photometer Model UVI-II measures the UV absorption of process liquids.

Common Applications

Water Treatment
Beverage Industry
Biotechnology
Pharmaceutical Industry
UV 254
UV 280
Spectral
absorption coefficient
TOC / DOC /
PAK / ASTM
Toluol / Benzol
Color measurements
Häufige Einsatzgebiete
Trinkwasser / Abwasseraufbereitung
Lebensmittel & Getränkeindustrie
Biotechnologie
Pharmazie

The Model UVS-1 inline photometer operates on the principle of dual-channel light absorption to measure the color of liquids. The sensor optics incorporate two LEDs with different wavelengths. The probe measures the absorption caused by turbidity and UV-absorbing substances.

Turbidity is typically measured in the NIR range. Mathematical operations are used to determine the UV value, eliminating the influence of turbidity.

The UVS-1 sensor enables simultaneous, precise measurement of absorption at two different wavelengths. Its measurement principle eliminates interference from turbidity, window soiling, LED aging, etc. The integrated LEDs have a significantly longer lifespan than other light sources, ensuring extended service life. The measuring range extends from 0 to 0.1 absorption units to 0 to 5 absorption units.

The sensor window is made of sapphire, and the probe housing is manufactured from high-grade 1.4404 stainless steel. Many other materials are available upon request. The device can be integrated into the process using a ball valve, flange, or similar connection. We offer customized solutions tailored precisely to your needs. (This allows the sensor to be precisely configured to provide you with the best possible solution.)

  • Nominal sizes: DN25–DN125 / 1″ to 5″
  • Process pressure: PN16 (higher pressure on request)
  • Temperature range: Up to 80°C / 130°C with air purge
  • Sensor material: Stainless steel 316L (1.4404)
  • Window material: Sapphire / Quartz glass / Suprasil
  • Seal material: EPDM (other materials on request)
  • Measuring range: Typically 0–4 AU
  • Optical path lengths: 2 mm to max. 250 mm
  • Repeatability: ±1%
  • Measuring wavelengths: 254 nm or 280 nm (others on request)
  • Reference wavelength: 850 nm (optional)
  • Protection class: IP65 / NEMA 4X
  • Cleaning: CIP / SIP (sanitary flow cell only)
PRODUCTS

UV/VIS/NIR Photometers for Industrial Applications

Model Messenger (MSG)

Description

The Messenger (MSG) signal amplifier is compatible with all optical sensors from the Chemtronic and Monitek series. It supports the simultaneous operation of up to four single-channel sensors, while allowing each sensor to operate independently. Individual sensor signals can be freely linked, enabling applications such as automated dosing systems.

The system is configured via a PC or laptop using intuitive software. As an option, the Messenger is available with an integrated panel PC for local operation and visualization. This flexible architecture ensures seamless integration into industrial process control systems.

  • Power supply: 90–260 VAC, 50–60 Hz (optional: 24 VDC ±10%)
  • Power consumption: Max. 50 VA
  • Relay outputs: 4 freely programmable relays (48 V / 2 A)
  • Analog outputs: Up to 4 × 0/4–20 mA, galvanically isolated
  • Interfaces: RS-232C / RS-485 Modbus RTU
  • Digital inputs: 4 × (optional), 5 V High
  • Repeatability: ±1%
  • Operating temperature: −10°C to +50°C
  • Housing: Stainless steel 1.4301 / IP65 (NEMA 4X)
  • Optional explosion protection: ATEX Zone I / Zone II
CONTACT

Looking for the right solution?

Benefit from more than 40 years of experience, field-proven measurement technology and personal consultation. Together, we will find the right solution for your application. Visit our contact page and tell us about your project to receive a non-binding quotation.